24 Hour Emergency Service


TD 138 Garage Door

TD 138 Features

The TD 138 insulated commercial sectional door has established a reputation in the overhead door industry as a tough, energy efficient door designed to meet the rigors of industrial/commercial use. TD 138's unique, fully automated computer controlled manufacturing process produces a state-of-the-art steel/polyurethane/steel sandwich panel that is lightweight, yet incredibly strong and energy efficient.

1 3/8" Thick - An Insulation R-Value of 12.60

Therm-O-Dor™ TD-138 features a continuous foamed-in-place polyurethane core providing an R Value of 12.60, twice the efficiency of polystyrene insulated panels.

Strength & Rigidity

Achieved by the unequalled adhesion of the steel skins to the polyurethane core, the injected foam forms an even compact block that adheres strongly to every inch of the steel.


Separates the outside and inside steel skins to reduce cold/heat conductivity and stop frost and moisture from collecting on the inside of the door.

Between Section Weatherseal

Air and wind infiltration is eliminated by the use of a continuous weatherseal inserted between each section.

A Total Weatherseal System

The weatherseal system uses a "U" shaped bottom weatherseal that conforms to minor floor irregularities and keeps out the weather. The perimeter of the door is sealed with the use of the steel/vinyl weatherstrip on the outside door jamb.

Virtually Maintenance Free

Door is finished with a baked-on 2-coat polyester paint. The inside and outside skins are of a corrosion resistant hot-dipped galvanized steel.

Insulated Windows

Inserts are mounted in a high-impact polymer frame with sealed lites of glass.

Fast and Easy Installation

Made possible with easy to follow installation instructions that come with every door.

Quiet and Smooth Operation

Only heavy-duty hardware and top quality rollers are used to ensure long life and smooth, quiet operation.

Painted Inside and Out

The continuous seamless steel inside skin brightens the interior of the garage and is easy to keep clean. The exterior may be painted to any colour.


The complete door is covered by a warranty for workmanship and material, as well as a 15-year warranty against cracking, splitting or deterioration due to rust.

Warranty provides 7 years of protection against delamination of the polyurethane foam from the steel skin on the panel and 1 year on defects in workmanship and material. Contact us for complete warranty details.

Standard and Optional Features

In designing each Therm-O-Dor™, door size, mounting conditions, operation cycles and windload all impact the final door structure. Our goal is to help ensure a safe operational door solution. Consult the chart below for standard and optional(*) features.

End Stiles

Single end


14ga single end

11ga single end*

14ga intermediate

Track Rollers

2" 10 ball short stem

3" 10 ball short stem

2" 10 ball long stem*

3" 10 ball long stem*

Speciality Track Rollers Long Stem

2" nylon sealed bearing*

3" UHMW sealed bearing*

3" rubber sealed bearing*

3" nylon stainless shaft*

Top Fixture

Standard duty single

Bottom Corner Brackets

Standard duty



Interior barlock*

Exterior keyed barlock*


Tub handle*

PVC hand grip*

Handle step plate*

Vision Lites

23" x 7"*

24" x 12"*

34" x 16"*

Exhaust Ports






Available to increase windload capacities*

Weatherstrip - bottom

3" U-type

4" U-type*

Weatherstrip - top

2" top flap

Weatherstrip - side



Weatherstrip Retainer

Bottom PVC V


Guide Types

Standard lift

High lift*

Vertical lift*

Low lift double track*

(All available to allow following the roof slope, if needed)

Horizontal reinforcing engineered for specific size requirements.

Guide Mounting

Bracket mount

Angle mount continuous 13ga*

Angle mount reverse 13ga*

Torsion Springs

Standard 10,000 cycle

Optional increased cycle*

Torsion Shafts

(engineered for specific requirements)

14ga galvanized tube 1"

Cold roll solid shaft 1"

Torsion Shaft Bearings

Standard flange bearing 1"

2 bolt cast flange bearing 1"*

Torsion Bearing Plates

(Engineered for specific weight requirements)

Created by

Legal notice