24 Hour Emergency Service


403-279-2915

Aluminum SA6000 Garage Door

The Steel-Craft Aluminum SA6000 door features leading edge design elements combined with extremely lightweight construction. With full view sections featuring Thermoclear® there are no visible vertical stiles, delivering a clean look with maximum visibility and high light transmission.


  • Offers an attractive solution for commercial & industrial buildings where visual access, light infiltration & aesthetics are key design considerations

  • Constructed from 45mm (1-3/4") thick 6063-T5 aluminum alloy

  • Practical & durable, yet stylish


Aluminum SA6000 Features

The Steel-Craft Aluminum SA6000 door features leading edge design elements combined with extremely lightweight construction. Full view sections featuring Thermoclear® with no visible vertical stiles delivers a clean look, with maximum visibility and high light transmission.


STANDARD DOOR SIZE

The SA6000 comes in standard heights and widths from 8' x 6' up to 20' x 18'


Anodizing Colour Options

Clear #17

Additional custom anodizing colours are available. Please contact us for details.


Painting Colour Options

Painting Colour Options

A full selection of custom paint colours is available by special order.


Vision Lite Options

Thermoclear Polycarbonate is available in triple wall 16mm.


Glass


  • Available in single pane and thermo sealed units
  • Glass options include Clear, Tempered, Georgian Polished Wire, Satin Texture and Laminated
  • Glass thickness available in 3mm & 6mm


Acrylic

Available in clear sheet only - 3mm and 6mm single pane


Lexan® Polycarbonate

Available in clear sheet only - 3mm and 6mm single pane


Thermoclear® Polycarbonate

Available in double wall 6mm or triple wall 16mm

Clear

Clear

Bronze

Bronze

Green

Green

Blue

Blue

Red

Red

Note:The glazing material (Thermoclear®) used is ideal for humid environments, however it differs from glass in that it's not sealed, therefore condensation may form in the cellular walls when interior/exterior temperatures are such that dew point temperatures are created (usually in periods of cooler weather). This condensation usually disappears when warmer weather returns.


INSERT PANEL OPTIONS

Full aluminum insert panels are available in anodized and painted colours. Also available in kick-proof design with insulated core.


Specifications


DOOR SECTIONS

Constructed from 45mm (1-3/4") thick 6063-T5 aluminum alloy.


Frame

Material thickness of top rail, bottom rail, end stiles and intermediate stiles are 1.8mm (0.071") (3mm (1/8") at fastener locations). Top rail height 44mm (1-3/4") overall. Bottom rail height is 50mm (2") overall. Combined height of meeting rails is 94mm (3-3/4"). Intermediate stiles are 60mm (2-3/8") wide. End stiles 100mm (3-15/16") wide. Bottom rail of bottom section and top rail of top section are 100mm (3-15/16") wide. Framework to provide 16mm wide glazing shelf.


Optional double end stile with matching bottom-most rail is 162mm (6-3/8") wide. Material thickness of double end stile/bottom rail 0.100" (3mm (1/8") at fastener locations).


Aluminum Insert Panel

5005 H34 13mm (0.051") thick aluminum sheet material sealed to door frame with glazing compound and held fast with rigid PVC snap-in mouldings.

Painted products (special order) painted to AAMA 2603 standards.


Finish

Anodizing applied to AAMA 611, 607, 608 standards.

Painted products (special order) painted to AAMA 2603 standards.


Glazing

Any or all sections can accommodate aluminum panels as well as single and sealed glazing materials up to 16mm (5/8") thickness. Suggested glazing types include 3mm (1/8") single glass/acrylic/polycarbonate, 6mm (1/4") single glass/acrylic/polycarbonate, 16mm (5/8") sealed glass/Thermoclear® etc. Note: Sealed acrylic or polycarbonate not available.


Glass materials to be set on two rubber blocks on bottom edge to absorb impact as door closes. All glazing materials sealed to door frame with glazing compound and held securely with rigid PVC snap-in mouldings.


HARDWARE


Track

50mm (2") or 75mm (3") Z275 (G90) galvanized steel. Material thickness is 1.9mm (0.075") for 50mm track and 2.7mm (0.105") for 75mm track. Vertical tracks to have a graduated slope. Vertical tracks to be bracket mounted 3.4mm (0.135") or continuous angle mounted 2.2mm (0.087") and fully adjustable for sealing to door to jamb. Horizontal track must be adequately reinforced per door size and weight.


Door Face Hardware

Includes graduated roller hinges and centre hinges of galvanized steel. Heavy duty rollers with hardened inner and outer races with 10 grade 500 ball bearings.


Strutting

Aluminum 6063-T5 alloy angular shaped 44mm (1-3/4") deep. Material thickness is 3mm (0.118") at furthest point from door face. Anodizing applied to AAMA 611, 607, 608 standards. Painted product (special order) painted to AAMA 2605, 2604, 2603. Strutting is required for doors 4000mm (13'0") and over in width.


Counterbalance System

Class II Oil Tempered ASTMA229 wire minimum 10,000 cycle torsion springs on continuous steel shaft (solid or tubular shaft as required by size and operation). Aircraft quality galvanized lift cables with a minimum safety factor of 5 to 1.


Locking

Interior mounted slide lock suitable for padlocking


Bottom Weatherstrip

U type arctic grade vinyl fits into integral bottom retainer


Section Interface Weatherstrip

Arctic grade vinyl bubble shaped weatherstrip at all section meeting rails in integral retainer


Jamb Mounted Weatherstrip

Anodized or painted aluminum with 2-point flexible arctic grade vinyl weatherstrip


Header Mounted Weatherstrip

Anodized or painted aluminum with 2-point flexible arctic grade vinyl weatherstrip


Operation

Manual-Standard.

Optional: Hand chain hoist (3-1 ratio) or electric operator recommended for doors over 12' 0" high


Available Sizes

Widths to 7366mm (24'2") and heights to 54900mm (18'0")

Created by

Legal notice